CEREC - System
CEREC by Sirona Dental Systems is a versatile chairside CAD/CAM system launched in 1986 and now in its fifth generation. The first two generations of CEREC, CEREC and CEREC 2, combined an intraoral scanner and a mill for producing the restorations in a single chairside cart. With the introduction of CEREC 3 in year 2000. The intraoral scanner and mill were split into two separate units which has continued with the fourth generation CEREC 3D and the latest system, the CEREC AC Bluecam.
CEREC - System
-
CEREC AC Bluecam with the MC L and MCXL milling centers
-
CEREC AC Omnicam with the MCXL milling center.
-
CEREC Bluecam and CEREC Omnicam.
-
Vintage CEREC systems - The Prototype, CEREC 1, CEREC 2 and CEREC 3.
CEREC/Galileos Integration: Dr. Kevin Pawlowicz shares his expertise
Combine CEREC digital impressions and computer-aided design with the diagnostic security of Sirona's 3D X-ray systems for genuine integrated implantology. It is now possible to perform surgical and prosthetic planning simultaneously -- and then implement this plan precisely using a surgical guide.
CEREC/Galileos integration. A patient case by Dr. Neal Patel
Combine CEREC digital impressions and computer-aided design with the diagnostic security of Sirona's 3D X-ray systems for genuine integrated implantology. It is now possible to perform surgical and prosthetic planning simultaneously -- and then implement this plan precisely using a surgical guide.
CEREC/Galileos integration: Dr. Sameer Puri shares his expertise
Combine CEREC digital impressions and computer-aided design with the diagnostic security of Sirona's 3D X-ray systems for genuine integrated implantology. It is now possible to perform surgical and prosthetic planning simultaneously -- and then implement this plan precisely using a surgical guide.
13 Jan 2020 | News and Events
The "Rebrush CEREC Software" project from Dentsply Sirona and Ergosign was awarded a coveted Red Dot: Brands & Communication Design Award in the "Interface and User Experience Design" category in Berlin. From the 8,697 applicants, the jury chose the high design quality and intuitive user interface of this project.
03 Jul 2019 | News and Events
Bringing dental care to remote regions of the Amazon - word about this undertaking of the Brazilian Doutores Sem Fronteiras (Doctors Without Borders) had spread. At the invitation of the organizers of the traditional Xingu Games (Jogos do Xingu, also called "Indigenous Peoples' Games") a DSF team of seven dentists traveled to Kalapalo to provide de...
02 Oct 2018 | News and Events
Giving a smile back every day to people who would otherwise not have the opportunity to receive dental treatment: such is the mission of Brazilian non-profitable organization DSF, Doutores Sem Fronteiras (Doctors without Borders). This year, initiator Dr. Caio Machado led a team of about 120 volunteers from Brazil, among them doctors, general and s...
03 Nov 2017 | News and Events
Almost one year ago, on December 6, 2016, the experienced implantologist and long-time CEREC user, Dr. Gerhard Werling, placed two implants in a patient's mouth using a SICAT OPTIGUIDE surgical guide in his practice in Bellheim, Germany. The viewers of the live stream provided by Dentsply Sirona were able to experience the process directly and also...
31 Mar 2017 | Spectrum
CEREC now allows for an open export of its model data. This is very exciting for all new and prospective users because the export of an STL model opens up new doors that have historically been closed with the system.
31 Jan 2017 | Clinical Excellence
Vita has released a new block for CEREC users to restore single dental implants. The block gives CEREC doctors a new option to fabricate implant restorations, as it forms a perfect union with the Dentsply Sirona TiBase.
The original Enamic block was introduced in 2013 after being in development for more than 10 years. The world of biomaterials is ...
Celtra Duo: An intriguing new material delivering strength and aesthetics, either polished or glazed
30 Nov 2016 | Clinical Excellence
Celtra Duo is a new Zirconia-reinforced Lithium Silicate (ZLS) block for CEREC that has the unique properties of being both aesthetic and strong. What is most intriguing about this material is that using an oven is optional. In this article, I present a clinical case using Celtra Duo and then an interview with Dr Markus Vollmann, Dentsply Sirona's ...
09 Nov 2016 | News and Events
A CEREC restoration is placed somewhere in the world every five seconds. This amounts to more than 35 million inlays, onlays, crowns, veneers and abutments to date which have been manufactured by around 38,000 active CEREC users and placed for patients in one session.
30 Sep 2016 | Spectrum
People with Cerebral Palsy in Sydney are benefitting from the latest in CAD/CAM dental technology in the form of a full CEREC chairside scanning and milling system thanks to an exceedingly generous donation from Dentsply Sirona.
31 Jul 2016 | Clinical Excellence
The CEREC digital implant dentistry workflow provides a completely integrated experience incorporating all aspects of surgical and restorative implant dentistry. The incorporation of in-house milling of surgical guides and in-house fabrication of custom abutments and screw-retained crowns has been instrumental in this regard.
The recent introducti...
31 May 2016 | Clinical Excellence
Full-contour zirconia has emerged as one of the most popular restorative materials in the last few years. The increased use of this material by dentists worldwide is a result of many restorative advantages: extremely high flexural strength; allows more conservative preparation of teeth; allows a lower minimal thickness than other ceramic materials;...
31 Mar 2016 | Spectrum
After enjoying all of the benefits attributed to Sirona's digital workflow since we initially acquired the inEos X5 scanner and MCXL milling unit a few years ago now, it was a natural progression to then look towards 5-axis milling.
25 Feb 2016 | News and Events
The new CEREC Zirconia workflow gives dentists a means of providing a high-performance material chairside. New devices and tried-and-tested processes make for an efficient, time-saving workflow.
25 Feb 2016 | News and Events
It is a long way from a brilliant idea to a mature product, especially when this product is to become a generally recognized standard.
25 Feb 2016 | News and Events
Zirconium dioxide has been successfully used in dentistry for about 20 years. The majority are restorations with zirconia frameworks and ceramic veneers.
31 Jan 2016 | Clinical Excellence
Sirona revolutionalised digital implant dentistry by providing a completely integrated digital workflow incorporating all aspects of surgical and restorative implant dentistry. The introduction of in-house milling of surgical guides with CEREC Guide 1 was visionary in this regard. However, the CEREC Guide 1 process is relatively technique-sensitive...
15 Jan 2016 | News and Events
Sirona is now offering even more options for the practice lab with the expanded CAD/CAM software CEREC Premium 4.4. It links the integrated patient-oriented workflow of the CEREC chairside software with the wide range of indications of inLab software. From crowns to bridges and other sophisticated restorations, all work steps can be carried out usi...
09 Oct 2015 | News and Events
The networking of systems and integration of functions for which external devices would otherwise be necessary, can benefit dental practices in several ways. Workflows become simpler and easier to control, safety and quality increase thanks to the reproducibility of processes, and the added value for practices is increased. As far as the implementa...
30 Sep 2015 | High Tech Dentistry
The SiCat Classic Guide and OptiGuide treatment modalities have proven to be predictable guided implant surgery techniques to ensure correct implant positioning based on a prosthetically driven treatment plan. Recently SiCat introduced a new surgical guide option for guided implant surgery, the SiCat Digital Guide, which allows the local fabricatio...
30 Sep 2015 | Spectrum
Thirty years ago this year, Sirona Dental Systems, then part of Siemens, launched the first intraoral scanner the world had ever seen. It was called CEREC - short for CEramic REConstruction - and was dubbed somewhat of a novelty at best. Developed by Professor Werner Mörmann and Dr Marco Brandestini at the University of Zurich and later sold lock,...
30 Sep 2015 | Spectrum
With CEREC, Sirona is celebrating the anniversary of a technology that has significantly changed the dental practice and the patient experience. Sirona is still setting trends and new standards with CEREC in its 30th year: CEREC offers remarkable flexibility in the areas of hardware and software, unlocking new clinical possibilities and efficient w...
30 Sep 2015 | Clinical Excellence
Meeting high aesthetic expectations while also completing preparation in a way that is gentle on tooth structure is the challenge that must be mastered when it comes to veneers.
For many years, conventional glass ceramics were the preferred material for this indication. But since VITA Enamic has become available - a hybrid ceramic with a dual netw...
18 Sep 2015 | News and Events
With CEREC, Sirona is celebrating the anniversary of a technology that has significantly changed the dental practice and the patient experience. Sirona is still setting trends and new standards with CEREC in its 30th year: CEREC offers remarkable flexibility in the areas of hardware and software, unlocking new clinical possibilities and efficient w...
14 Aug 2015 | News and Events
Thanks to technical advances, highly precise production is possible at a breathtaking speed. Ultra-modern technology also allows us to record these movements in super slow motion so we can make things that happen too fast to be detected by the human eye become visible.
31 Jul 2015 | Digital Imaging
Could a 14-second CBCT scan using Sirona's GALILEOS dramatically impact one's practice? The answer is a resounding YES. Cone beam computed tomography (CBCT) is state-of-the-art technology that, when integrated into a dental practice, elevates one's understanding of maxillofacial anatomy, advances dental diagnostics and improves treatment planning a...
31 Mar 2015 | Spectrum
At IDS 2015 in Germany this month, Sirona Dental Systems has again expanded its CEREC platform to give clinicians even greater versatility and more treatment options. The several new hardware, software, materials and treatment indications for the system come ahead of dentistry's most enduring high tech product's 30th anniversary.
31 Mar 2015 | Spectrum
Sirona is on track to reach its goal of 10,000 registrants for its 30th anniversary celebration of its industry-changing CEREC dental CAD/CAM system. The 3-day CEREC 30 educational extravaganza in Las Vegas is geared toward all dental and laboratory professionals.
31 Mar 2015 | Spectrum
In August of 2012, I had the distinct pleasure of being onstage in Las Vegas as part of the presentation that introduced the CEREC Omnicam to the world. It was apparent from that introduction to all current and prospective users of the CEREC technology that the Omnicam was a game-changer.
22 Jan 2015 | News and Events
CEREC in 2015 can look back at 30 years of clinical applications and millions of successful interventions for various indications. Restorations completed with the CEREC process have set the gold standard for years. In clinical tests also, CEREC has proven its performance capabilities many times over: More than 250 clinical studies, including long-t...
20 Nov 2014 | News and Events
Sirona Connect allows dentists and dental technicians to connect in a very modern way – they can exchange data conveniently and securely via the portal. The portal interface is integrated into the dentist's and technician's software, regardless of which software version is being used by either party, thus greatly facilitating workflow.
30 Sep 2014 | High Tech Dentistry
As with all forms of dental treatment, from the simple to the complex, predictability of outcome is largely dependent on accurate diagnosis and detailed treatment planning. This predictability can also be further enhanced by the careful utilization of advances in dental technologies.
The use of surgical guides in implant dentistry has taken many fo...
25 Sep 2014 | News and Events
Fully anatomical restorations can now be made even quicker and with greater color accuracy. Sirona Dental Systems, innovation leader for dental CAD/CAM technology, now offers pre-shaded translucent zirconium oxide. inCoris TZI C is available in ten classic tooth colors and in three different block sizes.
25 Jul 2014 | News and Events
After Danish zoos received negative headlines in the press over the past few months, one Danish zoo is now attracting positive attention - with a spectacular dental procedure. The damaged carnassial tooth of a lioness in Ree Park Safari in Ebeltoft (near Aarhus) was restored using the CAD/CAM system CEREC. The Danish zoo wanted to use the benefits ...
31 Mar 2014 | Clinical Excellence
After missing wisdom teeth, agenesis of the upper lateral incisors (tooth 12 and 22) is the next most common cause of congenital hypodontia, i.e. hypodontia that is unrelated to an accident.
For a young person in particular, such as the 18-year-old female patient shown in Figure 1, an anomaly of this kind often subsequently causes great psychologi...
15 Mar 2014 | Techniques
After missing wisdom teeth, agenesis of the upper lateral incisors (tooth 12 and 22) is the next most common cause of congenital hypodontia, i.e. hypodontia that is unrelated to an accident.
For a young person in particular, such as the 18-year-old female patient shown in Figure 1, an anomaly of this kind often subsequently causes great psychologi...
11 Feb 2014 | News and Events
Sirona, the technology leader in the dental industry, has entered into an agreement with a new material partner for the production of CAD/CAM blocks, such as composites and other restorative materials for CEREC and inLab. The Japanese dental company GC Corporation complements the group of selected partners that manufacture high-performance material...
31 Oct 2013 | High Tech Dentistry
Digital dentistry is the buzz word of the new millennium and manufacturers bandy it around with impunity. The common theme pushed to practitioners is that getting on the digital bandwagon is a must; exactly what the ensuing benefits of doing so, however, can be far more ethereal.
Loosely speaking, digital dentistry is an all-encompassing term that...
03 Sep 2013 | News and Events
In a pilot study conducted at the Center for Oral and Maxillofacial Surgery at the Goethe University in Frankfurt am Main, dental students rated the computer-assisted analysis system prepCheck from Sirona as "good or better".
31 Mar 2013 | Implants
In the mid 1990's, general dentistry went through an aesthetic revolution. Thanks to advancements in materials, techniques and technology, we truly had aesthetic alternatives to metal-based crowns and fillings. This spawned the "cosmetic" dentist and end of the 20th century, literally every dentist was advertising as themselves as a "cosmetic" dent...
31 Oct 2012 | High Tech Dentistry
Capturing occlusion with CEREC technology has certainly come a long way. Initial versions of CEREC had no method for the clinician to accurately determine occlusion. In fact, the only way to properly gauge occlusion was to design the restoration with no opposing scan and manually grind in the occlusion in the mouth. Subsequent versions of the syste...
31 Oct 2012 | High Tech Dentistry
Safety, predictability and efficiency - these three words, in my opinion, are the basis of what makes dentistry enjoyable. It seems that the longer I practice, the less tolerance I have for the stress that usually comes with our job as general dentists. In any procedure, I do try to find ways to apply these three glorious words to it. When performi...
31 May 2012 | Spectrum
Sirona has delivered the missing link in its digital dentistry solution with the launch of CEREC Guide, a software update to the CEREC platform that allows dentists to mill implant surgical guides in-house on the MC XL milling unit.
23 Apr 2012 | News and Events
Sirona, the dental industry's technology leader, is proud to announce the market launch of CEREC Guide.
03 Apr 2012 | News and Events
Launched under the name "CEREC Connect" in 2009, Sirona's innovative digital impression portal has revolutionized collaboration between dental practices and laboratories. Dentists and dental technicians are now in a position to exchange data quickly and conveniently via the Internet. With immediate effect this service will now be called "Sirona Con...
31 Jan 2012 | Clinical Excellence
New manufacturing technologies have paved the way for completely new treatment strategies. High performance polymer materials allow a relatively rapid improvement of the initial clinical situation. These materials are instrumental in the long-term development of functional and aesthetic characteristics. The following case report describes the rehab...
31 Jan 2012 | Briefs
Apparently waiting for the big 3-0 just won't cut it with CEREC fans! That's why Sirona is celebrating the 27-and-a-half-year anniversary of its industry-changing CEREC dental CAD/CAM system with a three-day extravaganza at the Venetian Casino and Resort in Las Vegas.
31 Jan 2012 | Briefs
Apparently waiting for the big 3-0 just won't cut it with CEREC fans! That's why Sirona is celebrating the 27-and-a-half-year anniversary of its industry-changing CEREC dental CAD/CAM system with a three-day extravaganza at the Venetian Casino and Resort in Fabulous Las Vegas.
23 Jan 2012 | News and Events
The CEREC 27 and a Half Year Anniversary Celebration will take place August 16- 18, 2012 at the Venetian in Las Vegas.
30 Nov 2011 | Clinical Excellence
CAD/CAM technology allows dental professionals to manufacture solid all-ceramic crowns chairside. A digital image of the preparation is captured with an intraoral camera and the crown is designed accordingly. A variety of ceramics are available for the construction of the crown, for example, aesthetic, easy-to-mill ceramics (IPS Empress® CAD). As ...
30 Sep 2011 | High Tech Dentistry
The control of gingival bleeding has always been a challenge in dentistry. The inability to stem gingival bleeding in the worst case scenario used to mean that the final impression would have to be deferred until the tissue health had improved. In the context of a single appointment delivery of a chairside CAD/CAM dental ceramic restoration, the ne...
23 Sep 2011 | High Tech Dentistry
The applications of CAD/CAM technology in dentistry continue to evolve at a rapid pace. The advent of systems like CEREC from Sirona has meant it is now becoming commonplace for patients to be scanned intraorally, their restoration designed on computer and then made completely by machine.
Restorations built-up by hand by talented ceramists have al...
31 Jul 2011 | Spectrum
Sirona Dental Systems has successfully launched its infiniDent portal in Australia in partnership with Stoneglass Industries. Using infinident, dental laboratories can order the full range of custom CAD/CAM products that can be milled on an inLab MC XL mill such as full contour IPS e.max crowns, plus additional products like titanium bars and abutm...
31 Jul 2011 | Surgery Design
Daniel Richards loves Cairns, the beaches, the warm weather; the constant flow of tourists and new settlers. This makes for an eclectic lifestyle and an ever-changing mix of friends. He has adopted the laid-back tropical approach and has even grown blasé about cyclones.
After 7 years of working and living in Cairns, he decided to open his own prac...
31 Jul 2011 | Special Report
The dynamics of clinical dentistry are evolving constantly. New materials, techniques and technologies are empowering general dentists to do more. Doing more means keeping more revenue in your practice and controlling the patient experience. So the obvious question is, when exactly do you refer?
Specialist prosthodontists Stephen Travis and Prasha...
31 Jul 2011 | Digital Imaging
The advent of dental implants, CAD/CAM technology and 3-dimensional imaging at varying times over the last 25 years were all watershed moments in the career of Sydney dentist Hugh Fleming. Now however, the convergence of all three is driving his passion and increasing his clinical efficacy.
“New technologies are driving many aspects of dentistry...
30 May 2011 | Ask Dr Christensen
QI’ve noticed a tendency amongst my colleagues who are involved heavily with promoting tooth-coloured restorations to resist restoring intracoronal two or three surface carious lesions with resin-based composite. They are encouraging patients to accept indirect tooth-coloured restorations, either milled in-office or made indirectly in a laborator...
15 Mar 2011 | Spectrum
Sirona Dental Systems has launched CEREC AC Connect, its new intraoral scanning system at an introductory price of $29,995. CEREC AC Connect utilises intraoral scanning technology perfected over five generations of its highly successful CEREC chairside CAD/CAM system.
15 Mar 2011 | Spectrum
Sirona Dental Systems has launched CEREC AC Connect, its new intraoral scanning system at an introductory price of $29,995. CEREC AC Connect utilises intraoral scanning technology perfected over five generations of its highly successful CEREC chairside CAD/CAM system.
01 Nov 2010 | Clinical Techniques
I started to use CEREC over 5 years ago. The learning curve is exceptionally steep (CEREC 3D) and to start with, you are very much in the hands of your advisors.
The polishing protocol advised was to use
rubber points of varying grades and finish with a diamond polishing paste. The supplied rubber points were just about adequate, but wore down ver...
01 Sep 2010 | Prosthodontic Perspective
I recently had the honour of being a Keynote Speaker at CEREC 25 in Las Vegas, a conference celebrating the 25th anniversary of CEREC attended by more than 3,000 dentists. I thought you might be interested in a piece of what I told them, which applies to things other than CEREC as well.
Whenever you are cementing an indirect restoration, whether co...
01 Sep 2010 | Clinical Excellence
For aesthetic reasons, the demand for implant-retained restorations composed of ceramic abutments and all-ceramic crowns is increasing. Zirconium oxide ceramics are used to manufacture the implant abutments, since they fulfill today’s strength and tissue compatibility requirements. Moreover, the combination of a ceramic abutment and an all-cerami...
01 Jul 2010 | Digital Imaging
Way back in 2005, I was listening to a speaker talk about a new way of placing dental implants that would revolutionize the process. He showed a video of an elderly Swedish man strolling into a dental clinic with a bag full of ill-fitting dentures and walking out later that same day with fully implant-supported final prostheses. The process used 3D...
01 Jul 2010 | Digital Imaging
Well-known Sydney Periodontists, David Grossberg and Kevin Todes, recently invested in a cone beam imaging system at their Macquarie Street practice for greater access to implant diagnostics, but have since discovered a broader range of applications for the technology.
“We operate a referral-based practice for patients who require treatment for ...
01 Jan 2010 | Clinical Techniques
Successful stress-free all-ceramic restorations require an understanding of the various materials and techniques that are available. Stress free and aesthetic bonded all-ceramic restorations are achieved through planning which offers predictable outcomes.
The following case on tooth 46 was completed over an extended one appointment visit with the a...
01 Jan 2010 | Clinical Excellence
Welcome to the new age of digitally designed restorative dentistry. With the in-house millings and out-sourcing option with CEREC Connect, the CEREC AC Bluecam technology can now be the central management system for all indirect restorative needs.
Chairside CAD/CAM success relies primarily on the effective management of the restorative clinical the...
01 Jan 2010 | Spectrum
Sirona's CEREC AC and SIROLaser Advance have been awarded the 2009 Good Design Award for excellent product concept and appearance. The two products were designed by collaboration between Sirona and the Germany-based Puls Design. The Good Design award is awarded by The Chicago Athenaeum - the Museum of Architecture and Design together with The Europ...
01 Jan 2010 | Briefs
CEREC will celebrate its Silver Jubilee together with the world in Las Vegas from August 26-28, 2010. The world's leading dental CAD/CAM experts will gather at Caesars Palace, Las Vegas to report on the latest technological trends to an expected audience of 2,000.
01 Nov 2009 | Clinical Excellence
Achieving an aesthetic and functional outcome in restorative dentistry depends on numerous factors. One of the most important considerations in an aesthetic treatment plan is the patient’s aesthetic expectations and biomechanical factors; having a clear understanding of the steps involved improves the predictability of the proposed restorative tr...
01 Nov 2009 | Clinical Excellence
The use of CAD/CAM systems in dentistry is both critical and reasonable for the design and fabrication of dental restorations; such systems not only increase the efficiency of designing and manufacturing, but they are also helpful with regard to the uniformity of products and they allow users to easily work with materials which would be difficult t...
01 Sep 2009 | High Tech Dentistry
The use of CAD/CAM technology to produce dental restorations is now well accepted, having transcended from novelty to the norm. A plethora of systems, methods and materials are being continually launched at the dental market with dozens of new examples shown at IDS 2009 this year in Cologne, Germany alone.
Regardless of the manufacturer or materia...
01 Sep 2009 | Spectrum
Sirona's CEREC chairside CAD/CAM system reached a new milestone recently with the 500th unit sold in the Australian and New Zealand market. Dr Mark Casiglia, principal of Apple Dental in Sydney's Lane Cove, is the proud owner of unit 500 and couldn't be happier.
01 Sep 2009 | Surgery Design
Dr Philip Makepeace has come a long way since being the first ever school dentist in the Southern Gulf of Carpentaria in Far North Queensland. 26 years later, he has just built a dream practice in his home town of Bundaberg with Distinctive Dental Care opening its doors in July.
“I’ve been practising in Bundaberg for over 20 years,” Dr Makepe...
01 Sep 2009 | High Tech Dentistry
Technological breakthroughs in computer-aided design and manufacturing (CAD/CAM) have created a comparable alternative to laboratory-generated indirect ceramic restorations.
The digitally milled restorative process has now been available for over 20 years and like most new technologies, chairside CAD/CAM has progressed through an evolution in both...
01 Jul 2009 | Finance
In my article in the May/June 2009 edition entitled Tax Planning - year end and otherwise: Trying to keep the complex simple, reference was made to a tax opportunity that would apply in the then current 2009 tax year, as well as the 2010 tax year.
Given the breadth of tax planning opportunities discussed in that article, I did not go into great det...
01 Jul 2009 | Digital Imaging
We all dream of having greater precision when it comes to our diagnostic skills. At times we find ourselves scratching our heads when trying to formulate the “ideal” treatment plan for a given clinical finding such as a questionable tooth (due to bone loss or failing RCT) and are unable to do so simply because we do not have enough information....
01 May 2009 | Special Report
In my practice, 2009 A.D. is really 13 C.E. - where CE stands for CEREC Era. What is amazing is how quickly things that at first appear exotic become part of the daily routine, and much as it is hard to imagine a time before airbags and ABS in cars, mobile phones, digital cameras and DVDs, it is hard to think back to before June 1996, when my then ...
01 May 2009 | Special Report
Dental exhibitions happen all over the world almost on a daily basis but every two
years, something very special comes along. Something so special that this year, a record 106,000+ visitors from the four corners of the globe defied the doom and gloom of the world financial crisis to descend on Cologne, Germany, for IDS 2009.
A colleague said to ...
01 Mar 2009 | Implants
CAD/CAM technology provides the basis for creating prosthetics for virtually all clinical indications and its applications in implantology are increasing.
CEREC-fabricated single-tooth implant crowns, for example, offer clear advantages compared with conventional lab-produced superstructures. It is now possible - within approximately two hours and...
01 Jan 2009 | Practice Management
Are your clients loyal to you? I think most dentists would contend that they enjoy the loyalty of most of the people who sit in their chairs. After all, it’s a pretty simple thing to recognize, isn’t it? You see the same faces coming back year after year. You’ve watched families grow up in your practice and you know their histories. Ask any o...
01 Jan 2009 | Spectrum
Sirona Dental Systems has kicked off 2009 with a bang, launching it's 5th generation chairside CAD/CAM system, the CEREC AC.
31 Mar 2008 | Technology
I am still very much enjoying my dentistry despite the fact that I have been practising for 27 years. So what has kept me so motivated?
There are so many new areas to explore as a general dentist that that alone keeps me interested. Some of these areas provide great clinical satisfaction and some provide very good financial returns.
Seven years a...
31 Mar 2008 | People
Sirona Dental Systems has appointed Mr Sanad Al Murayati to its CEREC
Team in Australia and New Zealand as the VITA Ceramics Technical Specialist.
31 Mar 2008 | Clinical Excellence
The term all-ceramics covers a variety of materials, which differ quite considerably in the way they are processed and in the type of properties they exhibit. Special materials are available for a wide variety of requirements. As a result of the rapid developments in this field, it is becoming increasingly difficult to maintain an overview of all t...
31 Mar 2008 | Spectrum
Ivoclar Vivadent recently invited 40 CEREC instructors from Europe and Asia to take part in a special meeting at their headquarters in Liechtenstein. Apart from the tremendous advances in both the hardware and software technologies in Sirona's CEREC to date, Ivoclar Vivadent has been partnering the CEREC system for 10 years and believes the next er...
01 Mar 2007 | CAD/CAM
With the introduction of a pre-manufactured machinable synthetic resin blocks for the production of stable long-term temporary bridges, the long-standing wish of CAD/CAM users has now been realised.
The block consists of a fibre-free, homogeneous, high-molecular and interlaced acrylate polymer with a Microfiller (composite). The blocks are present...
01 Sep 2006 | High Tech Dentistry
As a progressive, modern dental practice, we aim to be at the forefront of dental technology and patient care and provide our patients with the most advanced procedures available. It’s a commitment that demands unprecedented and escalating levels of investment - in both financial and human resource terms. But it’s one we must make. Dental pract...
01 Jul 2006 | Spectrum
CEREC's 20th birthday celebrations under the banner of 20YC commenced early in 2006 with a huge event in Berlin and will conclude later this year with another party in Las Vegas. In between however, the magnificent Hyatt Regency Coolum on Queensland's Sunshine Coast became CEREC Central for three days in June.
01 May 2006 | Special Report
I first saw a CEREC restoration during a presentation on tooth wear and longevity of dental restorations given by, of all things, an English dentist, in North Sydney in June 1999. Nick Jedynakiewicz wowed me with a slick talk on hard-core dentistry and finished with an elegant example of bonded CAD/CAM restorations at their best, in the replacement...
01 Sep 2005 | High Tech Dentistry
CEREC 3D is innovative technology which has been around since 1987. It can fabricate restorations for all single unit dental treatments: inlays, onlays, partial crowns, anterior and posterior full crowns and veneers. Since its inception, there have been over 7 million restorations placed worldwide, with a success rate of more than 90% over a 10-yea...
01 Jul 2005 | CEREC
If you’re on the fence about buying into CAD/CAM, I invite you to read on and learn a little more about what I consider to be dentistry’s most powerful tool.
The power of CEREC is in the ease of its use, the single visit appointment and the sheer joy dentists experience in exceeding their patient’s expectations. It’s highly refined softwar...
01 May 2005 | CEREC
Following CEREC’s birth on 19 September 1985 and the many innovations in the ensuing 20 years, further quantum leaps forward were again unveiled in April at IDS 2005.
For instance, CEREC now fully automates the process of fitting crowns to antagonists and interproximal neighbours.
In addition to CEREC’s prior ability to quickly construct and ...
01 Jan 2005 | Spectrum
Fans of the hit TV-show Monster Garage, seen in Australia on Discovery Channel on cable and satellite TV, should watch out for a guest appearance by Sirona's CEREC CAD/CAM system.
01 Jan 2005 | CEREC
The CEREC® 3 Chairside CAD/CAM
Restoration System from Sirona
Dental Systems is
taking restorative control
to a new dimension with
the introduction of an
updated software
package. The new software
features new
three-dimensional design
modes for veneers,
including “Database”
and “Replication.”
In Database mode, the
software wi...
01 Dec 2004 | CEREC
1 4 - e L A B O R A T E N o v e m b e r / D e c e m b e r 2 0 0 4
When Greg Karabasis and I first
set-up Melbourne Dental
Ceramics nearly 10 years ago,
we decided that our aim would be not only
to produce excellent results, but also to
keep up with the latest technologies and
innovations in aesthetic and restorative
dentistry. This led us t...
01 Dec 2004 | CEREC
1 8 8 - D e n t a l P r a c t i c e N o v e m b e r / D e c e m b e r 2 0 0 4
It is now fourteen years since Australia
saw the introduction of the original
CEREC 1 (hydro version) for the fabrication
of all-ceramic dental restorations.
The foundations of the CEREC method
of dentistry into my practice was laid after
I attended a CEREC course ...
01 Sep 2004 | CEREC
CEREC
CEREC
Behind the CEREC
scenes
By Stephen Beckedahl
Sept/Oct 2004
Being first to market with any new product is fantastic,
but at the same time, it’s a double-edged sword.
Everyone immediately thinks of the pot...
01 Jul 2004 | CEREC
cerec
CEREC
My mate Sir Erec
By Dr Glen Harvey
July/August 2004
After being introduced to Erec in early 2001, I’ve
been a proud supporter ever since. Having spent eight
years in the RAAF with plenty of great equipment to
w...
01 Apr 2004 | CEREC
Change is something we embark upon every day without even realising it. Some is conscious, some subconscious and some is just forced upon us whether we like it or not.
It’s human nature for many of us to actively resist change, while some have learned to embrace it and indeed actively review everything they do to see if a change for the better c...
01 Dec 2003 | Surgery Design
SURGERY DESIGN
Teaming-up in a high tech country practice
By Joseph Allbeury
November - December 2003
Setting up your first practice is an exciting time for any dentist an...
01 Oct 2003 | Surgery Design
Moving a busy dental practice is never an easy decision, regardless of the
drawbacks of your existing location.
We had been in practice here in Gympie for 13 years in the same premises in
Mary Street in the centre of town. The surgery was on the first floor and had
been the manager’s office of the old ES&A bank. Right after tak...
01 Oct 2003 | CEREC
In 2000, I commenced a major upgrade and renovation of my main practice in
Gladstone, utilising the newer technologies that would benefit both the patient
and our bottom line. My wife and I visited Brisbane and talked to Geoff Staples
from Halas. Within minutes of talking to Geoff, we found ourselves looking at
the CEREC 3 and reali...
01 Aug 2003 | CEREC
CEREC
My new share portfolio
by Dr Arthur Shizas
July/August 2003
My practice was first introduced to CEREC in 2001 in the form of CEREC 2. I
had seen some patients of one of the local CEREC users and was quite impressed
...
01 Apr 2003 | CEREC
CEREC
Dental elixir for an eternal practice
by Dr Terry Wong
March/April 2003
I have heard it been said by some that the elixir for eternal youth is driving
a high performance vehicle...
01 Feb 2003 | CEREC
My colleagues often ask this question of me, and it is one I too had asked. I enjoy the exploration of new challenges and having just taken up the saxophone, I felt it worthwhile investigating the claims of CEREC® converts?
There were a number of factors to consider, but two questions most prominent in my mind were how does it stand up clinically ...
01 Jun 2002 | CEREC
CEREC
Achieving the perfect score
by Dr Terry Fenn
May/June 2002
It's been almost a year since I started using the CEREC 3 machine, which seems like a good time to sit back and check my score.
I've been in practice in Mosman Park, Pert...
01 Dec 1998 | Clinical Excellence
There has not been a great deal of change in the teaching of the basic principles of operative dentistry but the science of dental materials has changed considerably.
The concept of extension for prevention, as proposed by GV Black earlier this century, is still being taught in most dental schools. Most of today’s practitioners were taught the tr...
01 Dec 1998 | Clinical Excellence
There has been much controversy recently regarding the use of silver-mercury amalgam in dentistry.
The Australian Dental Association, the NHMRC, the World Dental Federation and the World Health Organisation maintain that amalgam is a safe material for use in restoring teeth.
Amalgam is a relatively cheap, easy-to-use and forgiving material. It is ...
31 Mar 1991 | Special Report
The CEREC computer-aided inlay/onlay system is an optical scanning and milling system that claims to replace the conventional impression model and inlay system constructed in laboratory.
Using the CEREC camera, a three dimensional image of the dental preparation is made. This optical impression can be used to design an inlay, via a computer, direc...
LOGIN TO PORTAL
Clinical
Clinical
Techniques
Clinical
Stream the latest dental videos...
Sponsored Links...
Your account is currently locked
To unlock your account, you need to enter a Verification Code
that will be sent to your email address.
Click the button below to receive the Verification Code at
{email}
Sign in!
Contacting Support
Please complete the from below to contact technical support.
You will be contacted within 24 hours of lodging your support request.
Resetting Your Password
To reset your password, you need to enter a Verification Code that will be sent to your email address.
Click the button below to receive the Verification Code at
Resetting Your Password
Please enter your email address below and click CONTINUE.
Register Now!
Register now to join the Dental Community and access content restricted to the dental profession.
Please enter a password below.
- Password Conditions
- One Upper Case Letter
- One Lower Case Letter
- One Special Character
- One Number
- Length 8 Characters
Create Account
Dentevents.com is the continuing education calendar for dentistry. Your login lets you register for events from a growing list of associations, conference managers and industry bodies.
Your Dentist connects dental clinicians with patients in Australia, New Zealand and other locations. Your login lets you keep your details and details of your practice up-to-date.
The Dental Community gives you access to a suite of tools to help you in your professional life, regardless of your role in the dental profession. Use your login and see for yourself!
Plus you receive online access to the latest editions of...
By clicking “Create account” you agree to our terms of use and privacy policy including receiving email updates from us and our partners. You may unsubscribe at any time.
Nearly done!
We've sent an email to
Please enter the number contained in the email below.
Didn't get the email? Try checking your spam or junk folder. If you're still having trouble, please contact us.
Saturday, 25 January, 2025