Five options for 5+1 precision milling

The new M2 milling unit comfort line exemplifies precision and flexibility. With the M2 Wet Heavy Metal, the M2 Teleskoper, the M2 Dual Wet Heavy Metal, the M2 Dual Teleskoper and the M2 Dual Double Teleskoper, the comfort line comprises five milling units with fully automatic 5+1 axis simultaneous milling technology. The highlight in terms of flexibility is the extra-large Teleskoper Orbit (ø 125 mm): in combination with special interchangeable holders, it allows the processing of all common soft and hard material blanks of ø 95 mm, ø 98 mm, ø 106 mm or even ø 125 mm.

With the Teleskoper Orbit, blanks can be removed and reinserted back into the orbit at the same position with high precision in micron range. This is particularly helpful for adjusting the friction of telescopic jobs or for the two-stage fabrication of immediate restorations in case of implant-supported prostheses (Double Milling technique).

All M2 milling units are stand-alone solutions: it is possible to start milling and calibration processes or load elaboration tools directly from the machine via the integrated PC with touchscreen. The optical tool detection ensures greater safety during milling.

The two separate large milling chambers are the trademark of the M2 Dual milling units. However, the M2 and the M2 Teleskoper milling units are also characterised by spaciously designed, optimally illuminated and easily accessible milling chambers as well as a separated, contamination-protected tool magazine with 21-compartment automatic tool changer function. Additional tool magazines with 21 tool slots each, are optionally available. Depending on the machine type, up to 63 (M2 Dual) or 84 (M2) processing tools can be then easily stored and organised. The automatic self-cleaning function, the integrated Cleaning Kit for an easy cleaning of the milling chambers and the Ioniser (optional) ensure a particularly clean environment for the materials.

The performance range of the machines can be also extended by integrating different accessories available, e.g. the Glass Ceramics Holder 9 Teleskoper, the Raw-Abutment® Holder 6 Teleskoper and the JawPositioner Support. With the M2/M2 Dual Upgrade Kit, the M2 Wet Heavy Metal and the M2 Dual Wet Heavy Metal milling units can be upgraded to the Teleskoper version.